辅助性
为了完善电池测试设备的生态，Arbin为用户准备了丰富的辅助模块，以满足进阶测试的需求。这些模块扩充了设备的辅助功能，并且可以外置灵活摆放（比如靠近电池放置）。借助这些模块，用户可以方便的在现有系统中增加辅助功能。
可选模块： 选配辅助功能模块
辅助电压输入（参比电极）
辅助的电压信号采集系统适用于所有Arbin系统，具备极高的输入阻抗，以便在多电极实验中提供额外的参考电极，如当前普遍使用的是低温析锂测试，对测量的输入阻抗要求极高； 该模块也可用于同步监测电池组内的单体电芯电压，表征电芯的一致性特征。
- 每个模块有8个输入接口
- 0.02% accuracy
- Up to 100G Ohm input impedance
- (-5)至5V
- (-10) to 10V
- (-25) to 25V
- (-50) to 50V
- (-100) to 100V
辅助温度信号输入
实时温度数据可以用于安全限制和测试控制 ,适配多种类型的温度传感器。
- 16 inputs per module
- 0.2~1°C accuracy
- T型热电偶
- K型热电偶
- PT-100热敏电阻
- 10k Ohm Thermistor
辅助压力信号输入
压力输入选项可用于记录压力传感器的压力数据，其工作原理与辅助电压测量类似。
- 16 Channels
- 支持0 ~ 100mV 或 0 ~ 10mV 压力传感器输出电压范围
- ±0.1% FSR Measurement Accuracy
- 100G Ohm Input Impedance
- 15V Output Supply to Sensor
电化学阻抗谱（EIS）
Arbin's EIS Integration solutions are designed to support full or half-cell battery characterization or any other electrochemical device. Arbin's EIS board can easily integrate with your cycler for lower frequency needs. Arbin also has an integrated EIS solution that combines the multi-channel, high-precision battery test performance of Arbin with advanced EIS capability for higher frequency. These solutions share up to 64 Arbin channels (through multiplexing) with a single EIS unit to maximize the duty cycle of both instruments. No change in connection is necessary.
- Frequency Range of 10μHz to 100kHz Integrated With Arbin Cycler
- Available on Arbin LBT, LBTS, and HPT Systems
- GAMRY 1010E
- GAMRY 5000E
- GAMRY 5000P
- GAMRY Ref 3000
External Control 选配辅助功能模块
多温室接口（MTCI）
The TCI module allows the Arbin system to communicate with an approved third-party temperature chamber. Arbin's software can turn the chamber on/off and adjust the temperature during the test. Note: Arbin also offers a compact Multi-Chamber below for cell-testing applications.
- 目前内嵌60余款温箱控制器的通讯协议
- 13" x 7" x 3" Chassis Dimensions
- 使用便捷，具备通道间等待功能
- 符合RS232标准
CAN总线
CAN总线通讯模块允许Arbin系统与电池组内的电池管理系统通信。Arbin通道也可以由外部CAN信息控制，如来自BMS或外部的软件。
- 支持DBC导入
- CAN 2.0, CAN FD Protocol
- 13" x 7" x 3" Chassis Dimensions
Analog Output and Digital Input/Output (AO, DI/O)
模拟和数字输入/输出通道允许Arbin系统通过数字开/关继电器信号或模拟0-10V信号与外部硬件和设备互动。典型的用途包括泵、流量计、阀门等，用于流量电池应用。
- 8 Analog Output per module
- 16 Digital I/O per module
- (-10) ~ 10V Analog
- 数字继电器/开关量输入输出
其他可选功能模块
自动校准 Auto Calibration
The Auto-Calibration module enables the Arbin system to self-calibrate automatically.
- 1个模块即可应用于整台设备的所有通道
多温区温箱(MZTC)
The MZTC Multi-Chamber provides 4 or 8 fully independent mini-chambers with a temperature range of [ambient-10] to 60°C. Each mini-chamber can hold 1 to 4 cells depending on cell type and amperage. Racks are available for multiple MZTC units.
